Por favor alguien sabe que significa este error en el Router Cisco 2821?
%SYS-2-CHUNKBADMAGIC: Bad magic number in chunk header, chunk 0 data 4705D85C chunkmagic 400B77D8 chunk_freemagic 45D9FBA4 -Process= "<interrupt level>", ipl= 4, pid= 85 -Traceback= 0x412D6B14 0x400BA458 0x402F8D44 0x40042968 0x40042C4C 0x4001031C 0x400116BC
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.3(14)T1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Thu 31-Mar-05 12:22 by yiyan
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
ZonaFranca uptime is 6 days, 4 hours, 32 minutes System returned to ROM by power-on System image file is "flash:c2800nm-adventerprisek9-mz.123-14.T1.bin"
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Issue is a software bug, tracebacks are showing matches to bug CSCed32146,
Symptoms: A small buffer leak may occur on a router that has a BRI interface that is in the "Layer 1 Down" state (that is, the interface is not able to establish ISDN Layer 1).
Conditions: This symptom is observed when there is an attempt to activate inactive BRI interfaces. During such an attempt, small buffers are allocated periodically to transmit unnumbered messages to establish the TEI that is to be used on the interface. The buffers cannot be transmitted because the ISDN Layer 1 protocol is down, causing the buffers to be enqueued and lost from the small buffer pool until ISDN Layer 1 becomes active. These enqueued buffers may leak from the small buffer pool, although technically this is not a leak because the buffers are in a queue.
Possible Workaround: Enter the isdn tei-negotiate first-call command.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.