Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Error gettinf when i am going to save the conf.

Hi aal,

I am getting the following error when i am going the save the configuration

Pune_Dist#write

Building configuration...

% Warning: Saving this config to nvram may corrupt any network management or sec

urity files stored at the end of nvram.

Continue? [no]: n

% Configuration buffer full, can't add command: line con 0

%Aborting Save. Compress the config.[OK]

Details are c3745-advsecurityk9-mz.124-5b.bin

1 REPLY
Blue

Re: Error gettinf when i am going to save the conf.

This is telling you your nvram is full.

Either compress the nvram contents, using the 'service compress-config' command or delete un-needed files that may be on the nvram.

Please see the following link for more info on compressing nvram:

http://www.cisco.com/en/US/docs/ios/12_3/configfun/command/reference/cfr_1g06.html#wp1053235

125
Views
0
Helpful
1
Replies