01-13-2007 08:28 AM - edited 03-03-2019 03:21 PM
hi there
i upgraded my catlyst 6506 ios from c6sup22-dsv-mz.121-23.E2.bin to s222-ipservices_wan-mz.122-18.SXF7.bin
but the swicth has crashed nwo getin into rommon
the error
System Bo otstrap, Version 7.1(1)
Copyright (c) 19 94-20 01 by cisco Systems, Inc.
c6k_sup2 processor with 131072 Kbytes of main memory
Autoboot executing command: "boot disk0:s222-ipservices_wan-mz.122-18.SXF7.bin"
Self extracting the image... [OK]
Self decompressing the image : ############################################################################### [OK]
=
Compiled Thu 23-Nov-06 02:21 by kellythw
Image text-base: 0x40101040, data-base: 0x41108000
00:00:04: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:04: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
00:00:08: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:04: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
00:00:08: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
System Bo otstrap, Version 12.1(1 1r)E1, RELEASE SOFTWARE (fc1)
TAC Sup port: ht tp:/ /w w w.cisco.com/tac
Copyright (c) 20 02 by cisco Systems, Inc.
Cat6k-MSFC2 platform with 131072 Kbytes of main memory
Download Start
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
Download Completed! Booting the image.
Self decompressing the image : ####################################################### [OK]
%Software-forced reload
Breakpoint exception, CPU signal 23, PC = 0x41B4F624
=-Traceback= 41B4F624 41B4D5B0 4191E060 4191E08C 418046EC 41840EB8 41837288 418372E0 407442BC 40744FA4 41760D20 41760B3C 418BF780 418BC6A4 418BC8C0 41B41D8C
$0 : 00000000, AT : 1E020000, v0 : 43960000, v1 : 00000070
a0 : 44B78F40, a1 : 4398D54C, a2 : 00000005, a3 : FFFFFFFC
t0 : 0000000D, t1 : 00000000, t2 : 0000013E, t3 : 00000002
t4 : 4398D4F8, t5 : 00000000, t6 : 0000DC26, t7 : 4398D4F0
s0 : 00000000, s1 : 42BC0000, s2 : 43F15F20, s3 : 073B55C8
s4 : 44ACFB10, s5 : 44A4EC98, s6 : 00000040, s7 : 43350000
t8 : 4398D4D4, t9 : 00000005, k0 : 00000000, k1 : 00000000
gp : 42BFDF40, sp : 4398D580, s8 : 00000000, ra : 41B4D5B0
EPC : 41B4F624, ErrorEPC : 20600610, SREG : 3401F103
MDLO : 33333373, MDHI : 000000FF, BadVaddr : DFDDFFFE
CacheErr : 80000000, DErrAddr0 : 1E02000C, DErrAddr1 : 04B78F40
Cause 00000024 (Code 0x9): Breakpoint exception
Writing crashinfo to bootflash:crashinfo_20070113-153918
=== Flushing messages (15:39:18 UTC Sat Jan 13 2007) ===
Buffered messages:
Queued messages:
00:00:50: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:47: RP: Currently running ROMMON from S (Gold) region
00:00:50: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [1/1]
*** System received a Software forced crash ***
signal= 0x17, code= 0x43300000, context= 0x43967184
PC = 0x41b42394, Cause Reg = 0x3020, Status Reg = 0x34018002
rommon 1 >
00:00:51: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:51: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
00:00:51: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
*** System received a Software forced crash ***
signal= 0x17, code= 0x41df0000, context= 0x41e17e74
PC = 0x402cf86c, Cause = 0x1820, Status Reg = 0x34018002
help is realy appricated ..
how do i revert it back .
cheers
01-13-2007 08:59 AM
01-13-2007 09:11 AM
Hi there,
I don't thik that tftpdnld works for Catalyst 6K, i think that you have to go for xmodem or use the boot image to download the image using tftp (which might not be an option here), or as a last resort if you have a platform utlilzing the same file system use it to put the old image on a PCMCIA card and boot your switch with it (actually this works great).
HTH.
Mohammed.
01-13-2007 10:36 AM
copied old image to PCMCIA and in ROMMON > boot disk0:
its comes up . but when i restart it goes to again rommon MODE .
I did changed Boot parameter . but no luck ..
plese guide me what excat command i have to issue or change
Cheers
01-13-2007 11:54 AM
Hi there,
Its that simple, after booting it up from the rommon issue the following:
config-register 0x2102
boot system disk0:
write memory
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml
regards,
Mohammed.
01-13-2007 12:45 PM
OHHHH How can i forget conf reg .. tx
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: