Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

error loading new ios

hi there

i upgraded my catlyst 6506 ios from c6sup22-dsv-mz.121-23.E2.bin to s222-ipservices_wan-mz.122-18.SXF7.bin

but the swicth has crashed nwo getin into rommon

the error

System Bo otstrap, Version 7.1(1)

Copyright (c) 19 94-20 01 by cisco Systems, Inc.

c6k_sup2 processor with 131072 Kbytes of main memory

Autoboot executing command: "boot disk0:s222-ipservices_wan-mz.122-18.SXF7.bin"

Self extracting the image... [OK]

Self decompressing the image : ############################################################################### [OK]

=

Compiled Thu 23-Nov-06 02:21 by kellythw

Image text-base: 0x40101040, data-base: 0x41108000

00:00:04: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:04: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor

00:00:08: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:04: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

00:00:08: %OIR-SP-6-CONSOLE: Changing console ownership to route processor

System Bo otstrap, Version 12.1(1 1r)E1, RELEASE SOFTWARE (fc1)

TAC Sup port: ht tp:/ /w w w.cisco.com/tac

Copyright (c) 20 02 by cisco Systems, Inc.

Cat6k-MSFC2 platform with 131072 Kbytes of main memory

Download Start

! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !

Download Completed! Booting the image.

Self decompressing the image : ####################################################### [OK]

%Software-forced reload

Breakpoint exception, CPU signal 23, PC = 0x41B4F624

=-Traceback= 41B4F624 41B4D5B0 4191E060 4191E08C 418046EC 41840EB8 41837288 418372E0 407442BC 40744FA4 41760D20 41760B3C 418BF780 418BC6A4 418BC8C0 41B41D8C

$0 : 00000000, AT : 1E020000, v0 : 43960000, v1 : 00000070

a0 : 44B78F40, a1 : 4398D54C, a2 : 00000005, a3 : FFFFFFFC

t0 : 0000000D, t1 : 00000000, t2 : 0000013E, t3 : 00000002

t4 : 4398D4F8, t5 : 00000000, t6 : 0000DC26, t7 : 4398D4F0

s0 : 00000000, s1 : 42BC0000, s2 : 43F15F20, s3 : 073B55C8

s4 : 44ACFB10, s5 : 44A4EC98, s6 : 00000040, s7 : 43350000

t8 : 4398D4D4, t9 : 00000005, k0 : 00000000, k1 : 00000000

gp : 42BFDF40, sp : 4398D580, s8 : 00000000, ra : 41B4D5B0

EPC : 41B4F624, ErrorEPC : 20600610, SREG : 3401F103

MDLO : 33333373, MDHI : 000000FF, BadVaddr : DFDDFFFE

CacheErr : 80000000, DErrAddr0 : 1E02000C, DErrAddr1 : 04B78F40

Cause 00000024 (Code 0x9): Breakpoint exception

Writing crashinfo to bootflash:crashinfo_20070113-153918

=== Flushing messages (15:39:18 UTC Sat Jan 13 2007) ===

Buffered messages:

Queued messages:

00:00:50: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:47: RP: Currently running ROMMON from S (Gold) region

00:00:50: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [1/1]

*** System received a Software forced crash ***

signal= 0x17, code= 0x43300000, context= 0x43967184

PC = 0x41b42394, Cause Reg = 0x3020, Status Reg = 0x34018002

rommon 1 >

00:00:51: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:51: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

00:00:51: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor

*** System received a Software forced crash ***

signal= 0x17, code= 0x41df0000, context= 0x41e17e74

PC = 0x402cf86c, Cause = 0x1820, Status Reg = 0x34018002

help is realy appricated ..

how do i revert it back .

cheers

5 REPLIES
New Member

Re: error loading new ios

Re: error loading new ios

Hi there,

I don't thik that tftpdnld works for Catalyst 6K, i think that you have to go for xmodem or use the boot image to download the image using tftp (which might not be an option here), or as a last resort if you have a platform utlilzing the same file system use it to put the old image on a PCMCIA card and boot your switch with it (actually this works great).

HTH.

Mohammed.

New Member

Re: error loading new ios

copied old image to PCMCIA and in ROMMON > boot disk0:

its comes up . but when i restart it goes to again rommon MODE .

I did changed Boot parameter . but no luck ..

plese guide me what excat command i have to issue or change

Cheers

Re: error loading new ios

Hi there,

Its that simple, after booting it up from the rommon issue the following:

config-register 0x2102

boot system disk0:

write memory

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml

regards,

Mohammed.

New Member

Re: error loading new ios

OHHHH How can i forget conf reg .. tx

269
Views
12
Helpful
5
Replies