Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Error message while deleting the pcm.dat file from cisco 2811 router

Hi all,


When I tried to delete the file from cisco 2811 router. It shows the following error messages.

%Error deleting flash:/pcm.dat (File in use in an incompatible mode)

Tell me how I delete the file from router.

Regards

Ali Raza

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Error message while deleting the pcm.dat file from cisco 281

Try disabling the captures and then delete the pcm.dat file

It should be something like -

no voice hpi capture
no voice hpi capture destination flash:pcm.dat
7 REPLIES
Hall of Fame Super Gold

Re: Error message while deleting the pcm.dat file from cisco 281

Extact flash (nothing bad will happne), inser in PC, delete file, put back in router.

New Member

Re: Error message while deleting the pcm.dat file from cisco 281

Hi,

Is there any solution for this? Because the router is working in live enviornment and it is very difficult to take a down time for this.

LHR-LDA-JT-DC-RTR#delete flas
LHR-LDA-JT-DC-RTR#delete flash:pcm.dat
Delete filename [pcm.dat]?
Delete flash:/pcm.dat? [confirm]
%Error deleting flash:/pcm.dat (File in use in an incompatible mode)
LHR-LDA-JT-DC-RTR#

Regards

Ali Raza

Hall of Fame Super Gold

Re: Error message while deleting the pcm.dat file from cisco 281

Solution given above, 0 down time.

New Member

Re: Error message while deleting the pcm.dat file from cisco 281

Hi,

How could we remove the flash when server in running condition. I also don't have a slot in PC to insert a flash. Please tell some other suggestion to resolve this issue.

Regards

Ali Raza

Hall of Fame Super Gold

Re: Error message while deleting the pcm.dat file from cisco 281

Again for the hird time, you can remove the flash with the router running without any problem.

Then you get a $10 usb card reader to delete the file.

Bronze

Re: Error message while deleting the pcm.dat file from cisco 281

Try disabling the captures and then delete the pcm.dat file

It should be something like -

no voice hpi capture
no voice hpi capture destination flash:pcm.dat
New Member

Re: Error message while deleting the pcm.dat file from cisco 281

Hi Vijay,

Thanks....In first command I just add buffer in last..

no voice hpi capture buffer

Regards

Ali Raza

2157
Views
4
Helpful
7
Replies