Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

%ESWMOD-4-QUEUE_FULL:

HI all,

Here is an output of the "sh log" command:

Sep 26 01:55:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:55:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:55:42: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:56:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:56:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:56:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:57:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:57:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

Sep 26 01:57:24: %ESWMOD-4-QUEUE_FULL: Ethernet Switch Module transmit queue is full

The log buffer is full of this errors and the "sh inter fasX" don't shows any drop or something like that... has anyone deals with an issue like that?

Thx a lot in advance.

cheers,

2 REPLIES

Re: %ESWMOD-4-QUEUE_FULL:

Hi

hope this helps..

%ESWMOD-4-QUEUE_FULL : Ethernet Switch Module transmit queue is full\n

Explanation The transmit queue for the switch module is full and packets are being dropped.

Recommended Action Reduce the rate of packet transmission to the switched virtual interfaces to be lower than 9 Mbps.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_system_message_guide_chapter09186a0080228ef9.html#wp804152

regds

New Member

Re: %ESWMOD-4-QUEUE_FULL:

Thx for the response, so... I don't understand why this error if there are no drops in the interface counters...

1261
Views
0
Helpful
2
Replies