Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EVN support on 4500 and 6500

Hi.

Is EVN supported on Sup 7E on 4500 running enterprise image?

Also for 6500, it's SUP2T.

I see for 4500 on 3.4 image, EVN trunk is supported.

Does that mean EVN is fully supported on 4500?

Thanks                  

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

EVN support on 4500 and 6500

Hello Thomas,

EVN requires Supervisor Engine 2T and a minimum of Cisco IOS
Software Release 15.0(1)SY1.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-652204.html

EVN support is available IOS XE 3.3.0SG onwards on supervisor 7 bases 4500-E switch.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1/XE_330SG/configuration/guide/intro.html#wp1264973

Haihua

1 REPLY
Bronze

EVN support on 4500 and 6500

Hello Thomas,

EVN requires Supervisor Engine 2T and a minimum of Cisco IOS
Software Release 15.0(1)SY1.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-652204.html

EVN support is available IOS XE 3.3.0SG onwards on supervisor 7 bases 4500-E switch.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1/XE_330SG/configuration/guide/intro.html#wp1264973

Haihua

198
Views
5
Helpful
1
Replies