Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

extra 10/100 port on my 7206 xvr

Hi,

I have a 7206 vxr router with a dual 10/100 ethernet port. I just found out that I'll need an extra port on a router. can i buy a separate appliance with gigaethernet port(s) and connect on an empty slot? how is that appliance called?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: extra 10/100 port on my 7206 xvr

Hi,

You can try the 7200 Port Adapter (Cisco Part number PA-GE). However, these are fiber ports and require to have GBIC installed. You will need to have NPE-300 or above processor.

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet09186a0080091ce7.html

If you only need 100Mb copper ports, you can try PA-2FE-TX.

http://www.cisco.com/en/US/prod/collateral/modules/ps2033/ps2546/product_data_sheet09186a0080091c92.html

HTH,

jerry

3 REPLIES
Cisco Employee

Re: extra 10/100 port on my 7206 xvr

Hi,

You can try the 7200 Port Adapter (Cisco Part number PA-GE). However, these are fiber ports and require to have GBIC installed. You will need to have NPE-300 or above processor.

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet09186a0080091ce7.html

If you only need 100Mb copper ports, you can try PA-2FE-TX.

http://www.cisco.com/en/US/prod/collateral/modules/ps2033/ps2546/product_data_sheet09186a0080091c92.html

HTH,

jerry

New Member

Re: extra 10/100 port on my 7206 xvr

thanks.

regards

Super Bronze

Re: extra 10/100 port on my 7206 xvr

For a different option, you could also purchase an inexpensive L2 switch (e.g. 8 port 2960) that supports VLAN trunking and fan out one of your 7206 ports that way.

131
Views
0
Helpful
3
Replies
CreatePlease login to create content