Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Facing issue with 2611 after flash is removed

"""Hi;

After I erased my flash i reboot the Router 2611 and tried to Install new IOS from Xmodem (Console) and when I changed the Baud Rate to 115200 and restarted . Hyper Terminal does not display any thing ...Urgent"""

3 REPLIES
Hall of Fame Super Silver

Re: Facing issue with 2611 after flash is removed

Imran has posted this same question in the LAN Switching and Routing forum where it has received several responses. I suggest that any further discussion be consolidated in the LAN forum.

HTH

Rick

New Member

Re: Facing issue with 2611 after flash is removed

Did you configure a new HyperTerminal window for 115200 and reconnect to the 2611 router? If not, then the previous HyperTerminal window you were using was probably still configured for 9600 baud. Here's a reference link: http://www.cisco.com/warp/public/130/xmodem_generic.html

Re: Facing issue with 2611 after flash is removed

Imran, Are you able to Hyper Terminal with the default settings? If so, pls find the attach which will help you to install IOS via XModem. Thanks Goutam *Pls rate if it helps you.*

106
Views
4
Helpful
3
Replies
CreatePlease to create content