Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

Failing to Get Outside World

Hi all, hope I'm not being too much of a bother I have the following setup on my router after running sh run:

Interface Ethernet0

ip address 196.43.102.46 255.255.255.248

Interface serial0

ip address 216.104.193.198 255.255.255.252

no ip redirects

no ip unreachables

Interface serial0.59 point-to-point

bandwidth 64

ip address 216.104.193.198 255.255.255.252

no cdp enable

ip classes

ip route 0.0.0.0 0.0.0.0 serial0.59

access-list 1 permit 216.104.192.0 0.0.0.255.

and default gateway is showing as 0.0.0.0 0.0.0.0

I cant get the outside world from the router. HELP. and if not too much kindly explain what Interface serial0.59 point-to-point means???

Thanks in advance

---

Posted by WebUser Tendai Magore

3 REPLIES

Failing to Get Outside World

When we configure sub-interfaces IP is not suppose to be there on physical port.

2nd thing this is only valid for Frame-relay non broadcast networks .

what are you trying to configure ?

Thanks

Ajay

Silver

Failing to Get Outside World

you just don't have an internet connection thats why....

---

Posted by WebUser Dudez Fns

Silver

Failing to Get Outside World

Many thanks for your responses but the problem was with the internet provider, they managed to solve it, thanks Dudez and ajaychauhan...

---

Posted by WebUser Tendai Magore

274
Views
0
Helpful
3
Replies
CreatePlease to create content