Static is configured for all subnets between DC and DR point to point link.from DC router service provider mpls is connected,all branch office traffic comes via Mpls ,this routing is over ospf,SP router is connected to our DC router through an L2 switch,ospf process is configured in both routers,now DC and DR point to point link is also terminated to DC router.DR is also having an Mpls link in same way.Now we need to configure backup of DC mpls (used for Br office traffic) via DR Mpls ,so that in case of failure of DC Mpls link br office traffic will take DR Mpls and then point to point link to reach DC servers .
configuration is given below
For Mpls at DC router (Routing takes effect in case of communication with branch office) ========================================================================================
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.