Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Fastethernet is up , Line protocol Down Cisco 1841

Hi,

I have a cisco 1841 whose LAN interface is showing status as "Fastethernet 0/1 is up , line protocol is down" the duplex and speed settings in the Router are in Auto mode and the Router was working fine till now , when i changed the duplex settings to duplex full , speed 100 the ping replies comes back with 5-6 replies then the link dies again..

Kindly Suggest what could be done in this case

  • WAN Routing and Switching
1 REPLY

Fastethernet is up , Line protocol Down Cisco 1841

That's a physical problem. I would try replacing the cable, checking the switchport it's connected to, moving to a different switchport, and then last but not least, try moving your config to fa0/0 on the router and see if the problem still occurs. (The latter will require down time.)

HTH,

John

HTH, John *** Please rate all useful posts ***
4000
Views
0
Helpful
1
Replies