Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Filter INbound OSPF Routes on Pix 7.2

I have a Pix 515 running v7.2 and neighboring OSPF with an IOS Router.

I'd like to prevent the IOS router from injecting any more routes than intended by placing a "distribute list in" to filter IN bound routes on the Pix. (I don't have the ability to filter the outbound routes on the IOS router).

So on the Pix I don't see distribute-list as a valid OSPF command. Is there some other command or workaround that will provide the equivalent functionality?

TIA,

JPS

1 REPLY
Silver

Re: Filter INbound OSPF Routes on Pix 7.2

Hi,

Try this:

area x filter-list prefix dummy in

prefix-list dummy permit 1.1.2.0/24

Hope it helps, rate if does

Krisztian

163
Views
0
Helpful
1
Replies
CreatePlease to create content