Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Filter Routes

Hi,

GRE Tunnel is successfully established between RA & SA location.

OSPF is running on Local Area Network on both location && EIGRP is running between the tunnels.

On doing show ip route at RA backbone L3-Switch we noticed tons of routes from SA and same vice-versa.

We need specific network remote network to be seen on Backbone L3-Switch. I have read route map can help in my scenario, but unfortunately it didnt work.

need assistance to make this filter work

I would be happy to only see routes

192.168.120.0/24

192.168.150.0/24

192.168.100.0/24

10.255.250.0/23

from RA to SA

&&

need to only see routes

172.32.35.0/24

172.35.37.0/24

172.36.36.0/28

from SA to RA

2 REPLIES
VIP Super Bronze

Re: Filter Routes

saquib,

you can use prefix-list and also use distribute list to added to your EIGRP process:

ip prefix-list max24 seq 5 permit 0.0.0.0/0 ge 8 le 24

router eigrp 2

network 172.18.0.0

distribute-list prefix max24 in

Here is the link:

http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfeigrp.html#wp1030091

HTH

Reza

New Member

Re: Filter Routes

Hi Reza,

Doesnt work?

Any support to get correct syntax.

Any source web link to understand different routing protocol with different filtering options with examples.

112
Views
0
Helpful
2
Replies