09-11-2014 09:44 PM - edited 03-04-2019 11:44 PM
We have Cisco Switches in our organisation.
As a security perspective, i nedd to know the firware version of all my models.
Which is the best solution to get it???
09-12-2014 09:58 AM
HI,
Login to switch and Execute sh version command and pull the results.
Or if you have a centralized Core switch,login to switch and pull cdp neigbours details.
And you will be get it.
Regards,
Gurudath K S
09-12-2014 11:47 AM
Ways to check:
Normal/Single Router/Switch:
=======================
Show version.
Router#show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(28)>>>>>>>. this is the IOS version.
System image file is "flash:c2600-i-mz.122-28.bin">>>>>>> Exact image which is running on the box.
b)
R1#sh cdp ne de
Version :
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(28)>> this will give you the major ios id.
Stack:
======
Show ver
remote command show version>>>>>>>> this will read out the show version outputs for all the switches in the stack in one single command.
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: