FLASH modules for 2500 and 2600 series compatible?
I would like to ask if anyone has experiences with using 8MB FLASH SIMM modules from 2600 series routers in the 2500 series. I have tried to find as much information as possible but the technical info about 2500 FLASH modules is very sparse.
I am trying to extend a few 2500 series routers with more FLASH and I have some 2600 series 8MB FLASH modules handy but I am not sure if they are usable in the 2500 series routers.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...