cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
277
Views
0
Helpful
1
Replies

Flash upgrade to 3745 router

ted_rakiewicz
Level 1
Level 1

Hi, I tried to upgrade our flash on our 3745 from 32M to 64M to accomidate a new flash image. The image I tried to put on was

Platform: 3745

Feature Sets: ADVANCED ENTERPRISE SERVICES

Release: 12.3.14T5

It copied ok via xmodem and then rebooted like it should have but then got caught in a loop of booting-rebooting. The image needs 128M ram which I verified we have. Ihave attached the logs of what was going on while the router rebooted. Any ideas?

Thanks,

Ted

1 Reply 1

Patrick Laidlaw
Level 4
Level 4

Ted,

The first thing I would do is upload the original IOS image you were using. If the system works fine from there go an try to upload the new image again via tftp.

If it doesn't work after the new image download a differet version of your image.

Patrick

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco