When an IOS device encounters an error condition that forces it to crash, it will generally attempt to create a crashinfo file. The crashinfo file will contain information about the operating environment at the time of the problem.
The crashinfo file is a text file and you can read its contents (on the device you can use the more command to display the content of the crashinfo file or you can tftp the crashinfo file to the hard drive of your PC and then use a text editor to read the file). Some of the information contained in the crashinfo file is useful to us in trying to understand what caused the crash, and some of the information contained in the crashinfo file is very specialized and useful to Cisco TAC engineer who might be trying to troubleshoot the crash problem.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...