Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FR BECN

i've the lab environment - FR switch and 3 routers connected to it.

R1-

!

interface Serial0/1/0

no ip address

encapsulation frame-relay

load-interval 30

frame-relay lmi-type ansi

!

interface Serial0/1/0.1 multipoint

ip address 10.10.1.1 255.255.0.0

frame-relay map ip 10.10.1.3 103 broadcast

frame-relay map ip 10.10.1.5 105 broadcast

----

R3

!

interface Serial0/0/1

ip address 10.10.1.3 255.255.0.0

encapsulation frame-relay

load-interval 30

frame-relay class cisco

frame-relay map ip 10.10.1.1 301 broadcast

frame-relay lmi-type ansi

!

!

map-class frame-relay cisco

frame-relay cir 256000

frame-relay mincir 128000

frame-relay adaptive-shaping becn

!

!

-----

R5

!

interface Serial0/1/1

ip address 10.10.1.5 255.255.0.0

encapsulation frame-relay

frame-relay class cisco

frame-relay map ip 10.10.1.1 501 broadcast

frame-relay lmi-type ansi

!

!

map-class frame-relay cisco

frame-relay cir 256000

frame-relay mincir 128000

frame-relay adaptive-shaping becn

!

!

==========================

I tryed to load R5 serial interface from R1 router using ping with big packets. But no one BECN was send.

R5#sh frame-relay pvc

PVC Statistics for interface Serial0/1/1 (Frame Relay DTE)

Active Inactive Deleted Static

Local 1 0 0 0

Switched 0 0 0 0

Unused 0 0 0 0

DLCI = 501, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/1/1

input pkts 2609 output pkts 304 in bytes 3626188

out bytes 198080 dropped pkts 0 in pkts dropped 0

out pkts dropped 0 out bytes dropped 0

in FECN pkts 0 in BECN pkts 0 out FECN pkts 0

out BECN pkts 0 in DE pkts 0 out DE pkts 0

out bcast pkts 0 out bcast bytes 0

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

pvc create time 00:27:36, last time pvc status changed 00:27:36

R5#

Is't right and how to resolve it?

1 REPLY
New Member

Re: FR BECN

I suspect that the point of this is to try to generate BECN.

ensure frame-relay traffic-shaping is enabled. It's not shown in your config.

turn down your clocking to 64K links.

large pings should be create congestion here.

Noticed that DE remains at 0 as well.

398
Views
0
Helpful
1
Replies