Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

FR traffic shaping on FR switch!!

Hi all

In a lab environment I want to test Frame Relay traffic shaping between two routers, I am using a Cisco router as a frame relay switch which is configured as needed to allow FR connections (device type and static routing) BUT the issue is that I cannot find any documentation about how to configure FR traffic shaping parameters (CIR,...) to simulate FR Telco envirement.

Think you in advance.

3 REPLIES
Silver

Re: FR traffic shaping on FR switch!!

New Member

Re: FR traffic shaping on FR switch!!

Hi Jack,

Think you for your response, but those links are about how to configure FRTS on CPE not on the Telco equipments.

For example i want to fix a limit to CIR on the frame relay as an ISP would do on a real FR envirement.

Think you!

Silver

Re: FR traffic shaping on FR switch!!

You 're welcome and correct that PTT will setyp the PVC/SVC w/ BW limitation at their side. The FRTS in CE is used to prevent the package drop when there is burst traffic. It is not the same as PTT FR service. ;)

142
Views
0
Helpful
3
Replies
CreatePlease to create content