I'm attempting to troubleshoot a problem from one of our frame-relay links back to an ATM DS3 at our data center. Does anyone know if there's a way that a Catalyst 7200 can track incoming packets that have been marked with a FECN or DE flag set? I saw that the DE bit can be mapped to the CLP flag in ATM, but in my router I only see the outbound CLP flags.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...