I am confused, i have only configured this dlci on one interface but if i do show frame pvc this dlci is appearing on two different interfaces. This link is on back to back NNI and other side is appearing up but my side is showing down/down. Please have a look at following output.
PVC Statistics for interface Serial4/0 (Frame Relay DTE)
input pkts 0 output pkts 1 in bytes 0 out bytes 355 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 1 out bcast bytes 355 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 01:06:24, last time pvc status changed 01:05:41 cir 56000 bc 7000 be 0 byte limit 875 interval 125 mincir 28000 byte increment 875 Adaptive Shaping none pkts 1 bytes 355 pkts delayed 0 bytes delayed 0 shaping inactive traffic shaping drops 0 Queueing strategy: fifo Output queue 0/40, 0 drop, 0 dequeued
Configurations are as follows:
interface Serial4/0 -------------------------- no mention of dlci on this interface description no ip address encapsulation frame-relay IETF ip route-cache flow load-interval 30 mpls netflow egress dsu bandwidth 44210 framing c-bit cablelength 10 serial restart-delay 0 no clns route-cache frame-relay traffic-shaping frame-relay lmi-type ansi
interface Serial4/1.252 point-to-point description gc-azzuri-nni-mi | | ip address 18.104.22.168 255.255.255.252 no ip redirects no ip proxy-arp frame-relay interface-dlci 252
- I believe the link is not coming up as same dlci is configured on two different interfaces. Is that right?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.