Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Frame Relay QOS Config

I am working with 2621xm IOS (12.2(15)T10)

and I am looking for a basic QOS configuration to use so that I can prioritize traffic from my inside network to an external host IP. Below is what I think should work...please provide any suggestions/feedback.

class-map match-all CLASS-DEBIT

match access-group name Debit-out

!

!

policy-map QOSPOLICY

class CLASS-DEBIT

bandwidth 10

random-detect

ip access-list extended Debit-out

permit ip 10.200.10.0 0.0.0.255 XX.XX.XX.0 XXX.XXX.XXX.XXX

Applied to frame interface

frame-relay class QOSPOLICY

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: Frame Relay QOS Config

show frame pvc [dlci]

4 REPLIES
New Member
Hall of Fame Super Bronze

Re: Frame Relay QOS Config

'frame-relay class' command will reference a map-class not a class-map :)

class-map match-all CLASS-DEBIT

match access-group name Debit-out

!

!

policy-map QOSPOLICY

class CLASS-DEBIT

bandwidth 10

random-detect

map-class frame-relay QOSPOLICY

service-policy output QOSPOLICY

interface sx/x

frame-relay class QOSPOLICY

New Member

Re: Frame Relay QOS Config

what are the show commands that can be used to see if this works?

I did a show int s0/0 and the queueing strategy is still FIFO

Hall of Fame Super Bronze

Re: Frame Relay QOS Config

show frame pvc [dlci]

168
Views
0
Helpful
4
Replies