Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

frame-relay question

Hi,

I already know the answer to this, but just want to check.... with frame-relay, is there any way to multiplex both circuits and use them with 1 dlci and one IP address, or 2 dlci's and share an IP address?

Thanks,

Lisa G

1 ACCEPTED SOLUTION

Accepted Solutions

Re: frame-relay question

Here's a couple of interesting-looking features. I haven't read the chapters yet, so I don't know whether you need the co-operation of the service provider:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hwan_c/ch05/h_mfr.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hwan_c/ch05/hdmfr.htm

Kevin Dorrell

Luxembourg

9 REPLIES
Hall of Fame Super Gold

Re: frame-relay question

Please make a clearer example, because it's not clear what you want to do and what problem you are trying to solve.

New Member

Re: frame-relay question

can 2 T1's be bonded using frame-relay encapsulation?

Re: frame-relay question

In that case I really would use PPP multilink.

Re: frame-relay question

Lisa,

I suppose if they ran between the same two routers you could try putting them on point-to-point subinterfaces and then bundling the subinterfaces as a PPP multilink. I've never tried that though.

Wouldn't it be easier and cheaper just to ask the service provider to double the CIR?

Kevin Dorrell

Luxembourg

New Member

Re: frame-relay question

I researched that, PPP multilink over frame only works with one circuit (doh, not sure what the feature is good for, then, really.

I'm trying to fix a problem that I just inherited.

Thanks!

Lisa G

Re: frame-relay question

OK Lisa, that's useful to know. It would interesting to know what happens if you try to do it. I'll put it in the long list of "things to do in the lab some time".

Do you want to tell us more about the problem? Maybe we can brainstorm it.

Kevin Dorrell

Luxembourg

New Member

Re: frame-relay question

hahaha :-)

that is a long list, yes? actually mine has gotten smaller as I've gotten older :-)

i was hoping there was a feature that i didn't know about in regards to the frame-relay

Thanks!!

Lisa G

Re: frame-relay question

Here's a couple of interesting-looking features. I haven't read the chapters yet, so I don't know whether you need the co-operation of the service provider:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hwan_c/ch05/h_mfr.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hwan_c/ch05/hdmfr.htm

Kevin Dorrell

Luxembourg

New Member

Re: frame-relay question

Thanks.... I had actually just opened a TAC case and gotten to the same place, although it looked like it was FRF.15.

THANKS MUCH!!

Lisa G

127
Views
0
Helpful
9
Replies