On the Physical Interface i am using Frame-Relay Encapsulation.I have created various sub-Interfaces with different DLCI values.I want to monitor traffic flowing through a particular Sub-Interface using Ip Route-Cache Flow command as we generally do on the Physical Interface.But on Sub-Interface the only option available after entering the command Ip Route-Cache is same-interface.can anybody suggest how can i monitor traffic with a cache table on that Particular Interface.
When it was originally implemented NetFlow worked on the physical interface and was not able to differentiate subinterfaces. Cisco has introduced an enhancement to NetFlow which does process for subinterfaces. It is enabled using the ip flow ingress command. Look and see if that command is available on your subinterfaces. If it is not your code may not be recent enough to include this feature.
You can find more information about NetFlow on subinterafaces at this URL:
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...