Paresh,
The first thing is that Shaping is supported through DTS like commands (nested policy map and doing shaping on parent), but the when I try to use the frame-relay fragment on the map-class frame-relay, there is no such command, take a look....
7206VXR#sh ver | inc 12.0
IOS (tm) 7200 Software (C7200-K4P-M), Version 12.0(30)S5, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(30)S5, RELEASE SOFTWARE (fc1)
7206VXR(config)#map-class frame-relay FRF-TEST
7206VXR(config-map-class)#frame-relay ?
adaptive-shaping Adaptive traffic rate adjustment, Default = none
bc Committed burst size (Bc), Default = CIR
be Excess burst size (Be), Default = 0 bits
cir Committed Information Rate (CIR), Default = 56000 bps
custom-queue-list VC custom queueing
fecn-adapt Enable Traffic Shaping reflection of FECN as BECN
mincir Minimum acceptable CIR, Default = 1/2 CIR
priority-group VC priority queueing
tc Policing Measurement Interval (Tc)
traffic-rate VC traffic rate
7206VXR(config-map-class)#frame-relay fragment 640
^
% Invalid input detected at '^' marker.
Regards,
Luis
