Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

FRF.12 on IOS 12.0(30)S

Anybody has done FRF.12 (Frame-relay fragment) on a map class on a 7200VXR with 12.0(30)S IOS ? I see that is not supported, and I do not know how to do it in any other way! Help is appreciated.

Regards,

Luis

4 REPLIES
Purple

Re: FRF.12 on IOS 12.0(30)S

Luis,

I'm pretty sure that is supported. What bit does not work for you ?

Paresh

New Member

Re: FRF.12 on IOS 12.0(30)S

Paresh,

The first thing is that Shaping is supported through DTS like commands (nested policy map and doing shaping on parent), but the when I try to use the frame-relay fragment on the map-class frame-relay, there is no such command, take a look....

7206VXR#sh ver | inc 12.0

IOS (tm) 7200 Software (C7200-K4P-M), Version 12.0(30)S5, RELEASE SOFTWARE (fc1)

BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(30)S5, RELEASE SOFTWARE (fc1)

7206VXR(config)#map-class frame-relay FRF-TEST

7206VXR(config-map-class)#frame-relay ?

adaptive-shaping Adaptive traffic rate adjustment, Default = none

bc Committed burst size (Bc), Default = CIR

be Excess burst size (Be), Default = 0 bits

cir Committed Information Rate (CIR), Default = 56000 bps

custom-queue-list VC custom queueing

fecn-adapt Enable Traffic Shaping reflection of FECN as BECN

mincir Minimum acceptable CIR, Default = 1/2 CIR

priority-group VC priority queueing

tc Policing Measurement Interval (Tc)

traffic-rate VC traffic rate

7206VXR(config-map-class)#frame-relay fragment 640

^

% Invalid input detected at '^' marker.

Regards,

Luis

Purple

Re: FRF.12 on IOS 12.0(30)S

Luis,

I just did a check on feature navigator and it seems that you need at least 12.0T for it. The 12.0S train does not support it but the 12.2S train does...

Pls do remember to rate posts.

Paresh

New Member

Re: FRF.12 on IOS 12.0(30)S

Paresh,

The thing is 12.0S is needed for the MPLS, AToM support.... 12.2S does not offer all the features 12.0S does, but i'm sure there must be other way.

Regards,

Luis

96
Views
0
Helpful
4
Replies
CreatePlease to create content