Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

From which cat os and device support layer 3 routing

Hi Mates,

i would like to know which cat os supports or devices supports layer 3 routing?

bcoz , i want to make VLan with VTP

Thanks

Anjan

9 REPLIES
Hall of Fame Super Gold

Re: From which cat os and device support layer 3 routing

VLAN and VTP  is NOT Layer 3 routing.  What appliance running CatOS are you talking about?  What's your design.  Judging from your line of questioning you've got everything working against you.

New Member

Re: From which cat os and device support layer 3 routing

Hi,

i would like to make inter routing between Vlans.....so i dont have any router which supports subinterface with dot.q encapsulation.

thinking.....instead of setting up router on stick i can make it with layer 3 switch.

so what you suggest for this?

thanks

Anjan

Hall of Fame Super Gold

Re: From which cat os and device support layer 3 routing

Do you have the appliance yet or are you still sourcing?

New Member

Re: From which cat os and device support layer 3 routing

i dont have appliance...

Actually  my network is having these devices.

1.Cisco 2948G-GE-TX ----1no

2.Cisco 2950 ------3 no

3.Linksys -------4no

4.HP Procurce----5no

i think no where i can configure VTP with non cisco devices, there is only one solution is manual vlans.

can you give me some sugessions ....

Thanks

Anjan

Hall of Fame Super Gold

Re: From which cat os and device support layer 3 routing

Groan!

Geez.  If you don't need additional ports for the Layer 3 CatOS switch, then I recommend you get a cheap Cisco router to do your dot1q trunking.  The router you need should have FastEthernet or GigabitEthernet WAN ports.

Like I mentioned in my first post, what you are trying to do is a prime candidate for failure.  I have no idea what the Linksys and HP Procurve you are using can/can't do particularly with dot1q trunking.

I do pray that this is not a production network.

New Member

Re: From which cat os and device support layer 3 routing

Thank you brothers

anjan

Hall of Fame Super Silver

Re: From which cat os and device support layer 3 routing

Hello Anjan,

post a sh module of:

1.Cisco 2948G-GE-TX ----1no

a specific routing engine is required to perform intervlan routing it is not only a question of CatOS version.

if that part is missing as suggested by Leo you could go for a 3560 multilayer switch

Hope to help

Giuseppe

Re: From which cat os and device support layer 3 routing

Hi Mates,

i would like to know which cat os supports or devices supports layer 3 routing?

bcoz , i want to make VLan with VTP

Thanks

Anjan

Anjan,

As suggested by Leo vlan with vtp is normal function of switches it is not related with layer 3 routing, any how checkout the below link on intervakn routing support on cat series switches.Hope that clear your query !!

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bf9a.shtml

Ganesh.H

New Member

Re: From which cat os and device support layer 3 routing

Hi Anjan,

             you should go through hardware 3650 to on words.3650 is smart L3 switch.

i hope you will helpfull.

347
Views
0
Helpful
9
Replies
CreatePlease login to create content