Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FRTS for DECnet

Hi,

I got a problem with an application when it transferred data to remote site.

I found the speed of data transferring was limited under 64 Kbps, even though the communication line had bandwidth 256 kbps.

This application run on VMS and used decnet protocol.

I attached the QoS configure of head office and branch office

Thanks and appreciate for help!!

  • WAN Routing and Switching
5 REPLIES
New Member

Re: FRTS for DECnet

have any idea?

New Member

Re: FRTS for DECnet

Hi

Are you seeing any Packet drops in the qos policy applied on the interface

while transferring the file .

Regards

Syed

New Member

Re: FRTS for DECnet

Syed,

Queueing
        Strict Priority
        Output Queue: Conversation 40
        Bandwidth 128 (kbps) Burst 3200 (Bytes)
        (pkts matched/bytes matched) 430624/145055584
        (total drops/bytes drops) 82760/42422233

As you mentioned the cause would be packet drops so how can i solve the packet dropped issue in queue?

Thanks

Cisco Employee

Re: FRTS for DECnet

Hello,

Please be so kind to include full outputs of the following commands:

  • show policy-map
  • show class-map
  • show access-lists ! Interested in the ACL used in class-map

Best regards,

Peter

New Member

Re: FRTS for DECnet

Hi Peter,

Thanks for response.

I found large amount of packets dropped. I'm not sure about configuration which could be incorrect or not praticable.

Kindly see output in attach files.


Thanks!!

291
Views
0
Helpful
5
Replies
This widget could not be displayed.