Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FTP Session et Performance Routing avec NAT

Comment faire passer du traffic client ftp à travers un routeur paramétré en Performance Routing

Voila un extrait de ma config (ios 15.1.4M3)

pfr master
policy-rules fixe-statique
max-range-utilization percent 10
traceroute probe-delay 10000
!
border 10.34.34.253 key-chain O2Info
  interface FastEthernet1.1 external
  interface FastEthernet0 external
  interface FastEthernet1.7 external
  interface VLan1 internal
!
learn
  throughput
  delay
  periodic-interval 3
  monitor-period 2
  traffic-class filter access-list 101
  expire after time 600
max prefix total 1000
backoff 180 360
mode route control
mode select-exit best
resolve utilization priority 1 variance 5
resolve range priority 2
no resolve delay
!
pfr border
local Loopback1
master 10.34.34.253 key-chain O2Info
active-probe address source interface Loopback2
!
ip nat inside source route-map RMAP_Media3 interface Virtual-Template2 overload oer
ip nat inside source route-map SDM_RMAP_1 interface Virtual-Template2 overload oer
ip nat inside source route-map SDM_RMAP_2 interface Virtual-Template2 overload oer

ip route 0.0.0.0 0.0.0.0 Gateway1
ip route 0.0.0.0 0.0.0.0 Gateway2
ip route 0.0.0.0 0.0.0.0 Gateway3

Merc d'avance

Everyone's tags (4)
402
Views
0
Helpful
0
Replies
CreatePlease login to create content