I've got ospf set up as my igp, I thought it wasn't wise to redistribute bgp into ospf. I've got a full mesh ibgp to get all routes to r3.
I can't set up ebgp sessions between r3 and isp's. They only peer with one router.
Next hop self is already configured.
for instance, I thought r3 should have two routes to say www.google.com, and that 1 route gets into the routing table. If that route should fail the backup would automatically be set up in the routing table.
I can see the route to google at r1 and r2, but r3 has only one route that points to r1. If I disable the peering session to r1. R3 does not learn the route via r2.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...