Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Full T1 Works on 3250, Does not work on 1700

Hi,

I've got a full t1 circuit problem I cannot resolve.

I don't manage the device at the other end of the circuit. 

Config for both of my routers is the barest minimum on both routers:

!

interface Serial0/0

bandwidth 1536

ip address xx.yy.xxx.zzz 255.255.255.252

no fair-queue

service-module t1 timeslots 1-24

no cdp enable

!3250 router #1 goes up/up

Cisco 3250 v 12.4 with wic 1DSU-T1

All manner of advanced ping patterns are successful and do not generate errors on the interface.

!1700 router #2 down/down

Cisco 1700 version 15.something with HWIC 1DSU-T1 circuit is down/down

Debug complains no clock found on the 1700.

I've got a second 1700 that is known working and two more HWICs and I get the same down/down no clock found with all combinations of HWIC and router.  Telco claims line tests clean and it is with an old router.

What else can I try? 

What interface information might help?

Thanks in advance

Everyone's tags (1)
1 REPLY
New Member

Full T1 Works on 3250, Does not work on 1700

BTW, I can loopback  the 1700's locally and both units go up/up with all HWIC's.

97
Views
0
Helpful
1
Replies