Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM Firewall Version 3.2 xlat problem

We have a fwsm (FWSM Firewall Version 3.2(2) with multiple VLANs configured. We have a server on one of the VLANs with

the ip say Backup of servers on other VLANs are taken on this serer and hence we have opened the port range 22000 22009 from other zones to this zone.

The problem we are facing is that for one of the server in one of the VLANs backup fails frequently and this needs to be solved by using the command "clear xlate local". Backup of other servers in the same VLAN happens without much problems.

Once cleared the backup works fine. Can anyone provide a solution for this.

New Member

Re: FWSM Firewall Version 3.2 xlat problem

What is your xlate timeout set at and is there a specific amount of time that passes before the backup dies?

One thing to do is look at your connection information while the backups are running.

Issue the command show conn local (the ip of the local server) and notice what happens when the connection dies.

You may have to change your connection timeout and/or xlate timeout settings.