I have 2 depts distance is around 500 mts, rt now we are using "Pairgain" over 2 pair copper( 4 wire, ordinary telephone cable)its actually HDSL.but now a days pairgain is not available so i'm planning to replace all these pairgain systems using G.shdsl.
using 1841 router and "WIC1-Shdsl V2" interface card which will support 2 wire (single pair) & 4 wire(2 pair) copper cables.My plan is to deploy the cards in back-to-back configuration.
actually like this i have around 4 locations, 4th location is around 1.5 km, rt now all these are working with pairgain equipment,i just want to change the equipment and technology,bcoz i want to avoid the civil work, like digging the roads and cabling, for that i need to take permission from Goverment, i want to avoid that.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...