Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

GETVPN in the real world

I'm reading the GETVPN deployment guide (for work, not for fun) and it states you should have two KS routers and two GM routers. Is this really necessary? I have a MPLS WAN of about 20 sites (30MB peak traffic) and justification for four routers doesn't seem practical. Even two router might be a stretch. I can get them if necessary, but are they? Anyone have GETVPN up and rolling? Any other gotchas or tips are appreciated too.

3 REPLIES
New Member

Re: GETVPN in the real world

I got this up and going on 10 sites.

I only have two routers for my KS and GM (same routers) They are also my DMVPN Hubs at the main and DR Sites...2821s, they are doing fine....

Re: GETVPN in the real world

I have 2 routers at the hub, but neither of them establish IPSec SAs (ISAKMP builds OK). I have configured them as GMs too, but no IPSec. Any pointers?

New Member

Re: GETVPN in the real world

If you want post your config and I'll compare it to mine and let you know what is different.

372
Views
3
Helpful
3
Replies