Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

Servus,

we have some trouble with copper sfp's in a 7604 with sip-400 and SPA-5X1GE-V2 or 7600-ES20.

We tried some other sfp's but the link on the 7604 is still down. We don't have the problem with fiber sfp's.

Negotiation cannot be configured on the interface,

Any ideas?

André

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

André

You need SFP-GE-T, according to the release notes, I don't see GLC-T listed for support under SPA-5X1-GE-V2

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1327217

HTH,

__

Edison

6 REPLIES
Hall of Fame Super Bronze

Re: GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

André

You need SFP-GE-T, according to the release notes, I don't see GLC-T listed for support under SPA-5X1-GE-V2

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1327217

HTH,

__

Edison

New Member

Re: GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

Hi Edison,

we use glc-t sfp's , ios is 12.2(33)SRC3

André

Hall of Fame Super Bronze

Re: GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

André,

Sorry for asking for the SFP model, you included that information on the subject.

I've updated my previous reply.

__

Edison.

New Member

Re: GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

hi edison,

thank you for your fast response. You're right, GLC-T is only supported for the rsp but not for spa's or es20 :(. I guess we don't have a chance to get the glc-t's working right ?

André

Hall of Fame Super Bronze

Re: GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

André

That is correct. You need to purchase the SFP I mentioned above for the ES20 and SPA module.

HTH,

__

Edison.

New Member

Re: GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

Hi Edison,

Yes, your information was very helpful. Thank you again for that.

André

818
Views
5
Helpful
6
Replies