but if I've understood you correctly you have two GRE tunnels per direction one over ISP1 link and one over ISP2 link.
What happens if you use GRE tunnels without IPSec do you still see drops or not?
Data sheet of VAM2+ says:
Data Encryption Standard (DES) standard mode with 56-bit key: Cipher Block Chaining (CBC) • >>>> 3-Key Triple DES (168-bit) algorithms at speeds up to 292 Mbps • 128/192/256-bit Advanced Encryption Standard (AES) in hardware >>>>>• Performance to OC3 full duplex with 300 byte packets • Up to 5000 tunnels for DES/3DES/AES • Provides compression with IPSec at no extra overhead (LZS) • Secure Hash Algorithm (SHA)-1 and Message Digest 5 (MD5) hash algorithms • Rivest, Shamir, Adelman (RSA) public-key algorithm • Diffie-Hellman Groups 1, 2 and 5 • Online Insertion and Removal (OIR)
Performance to OC3 full duplex with 300 byte packets this means 149 Mbps of packets of 300 byte
it gives 62,083 pps per direction 124,166 pps aggregate
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...