GRE Tunnel flaps over multilink on one side only (EIGRP)
According to the log it looks like there's a K-value mismatch. If you only changed it on the remote sites and not all of the other neighbors, the adjacency won't come up. You can do a "sho ip protocol" on all routers and it will show you the k-values that you have set. The defautls are "metric weights 0 1 0 1 0 0". You can also, on R1, under the eigrp process type "default metric weights" to get them back to defaults. (This could also be set on the core and not the remote sites which is why I suggest looking at the weights with "show ip protocol"). I would just set them at the default unless you have a very good reason not to, but they have to match everywhere...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.