Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

grounding of a cat 3560

There is no grounding lug on a Cat 3560 switch. If I needed to ground it to the rack what would be the recommended method?

2 REPLIES
Hall of Fame Super Gold

Re: grounding of a cat 3560

A grounding lug is needed only for devices not rack mounted. If the rack itself is well grounded, all the devices fastened to it are grounded as well.

Hope this helps, please rate post if it does!

Re: grounding of a cat 3560

Hi,

Totally agree with Paolo, the device chassis itself of the rack mounted devices does this for us (although some rack mounted devices have a grounding lug).

[edit] but i've found that the 3560 has a ground lug:

http://www.cisco.com/en/US/products/ps7077/products_installation_guide_chapter09186a008076393e.html#wp1223523

HTH,

Mohammed Mahmoud.

120
Views
0
Helpful
2
Replies
CreatePlease to create content