We have Cisco GSR 12008 with PRP-1 running IOS: c12kprp-k4p-mz.120-32.S2.bin.
This chassis supports 3GE-GBIC-SC line cards. We are planning on using 10G line card but no specific information regarding compatibility is available in the net. Cisco's site states that 10G line cards are not supported with our chassis. It also states that 3GE-GBIC-SC line card is also not supported in the chassis. But we are currently using these 3-GE line cards in the chassis.
It would be extremely helpful if any clarification is shared.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...