Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Hardware Advice

We need to purchase routers to handle a full DS3 and 2 dS1's. We are trying to select a router type that won't be on next weeks EOL email. No multiservice required. BGP & web traffic.

1 REPLY
Purple

Re: Hardware Advice

Hi Mike,

I would suggest the Cisco 2821 ISR router for you. It has a rated forwarding performance of up to 87 Mbps, so it should be able to handle a full DS3. It has 1 network module slot and 4 interface card slots. So you should be able to get:

2 x WIC-1DSU-T1-V2 (1-port T1/Fractional-T1 DSU/CSU WIC)

1 x NM-1T3/E3 (1-port clear-channel T3/E3 network module)

OR

1 x NM-1A-T3 (1-port DS-3 ATM network module)

If you are expecting your traffic requirements to increase in the near future, you might want to consider the 3825 ISR router.

Hope that helps - pls rate the post if it does.

Regards,

Paresh.

120
Views
5
Helpful
1
Replies
CreatePlease to create content