Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Hardware for a fiber handoff

Hello everyone,

On a Single Mode Fiber handoff from the ISP with an SC connector can anyone confirm the part(s) needed to terminate this connection on a 2811 router?

Thanks in advance!  All replies rated.

2 REPLIES
Hall of Fame Super Silver

Re: Hardware for a fiber handoff

Hello Angel,

you will need a GE HWIC and the appropriate SFP

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd8016be8d.html

1 HWIC-1GE-SFP

1 SFP GLC-LH-SM=

2 SM fibers with LC and SC connectors of course SFP is too small to have SC connectors.

Note: The HWIC provides Gigabit Ethernet  connectivity but will not support line rate since the throughput is  limited by the platforms.

you cannot expect to handle high speed on it

see router performance in attachment

you will need also an appropriate IOS image

12.3(8)T4

IP Base

or better

Hope to help

Giuseppe

New Member

Hardware for a fiber handoff

Would you be able to use

EHWIC-1GE-SFP-CU

GLC-LH-LC

1479
Views
5
Helpful
2
Replies
CreatePlease to create content