Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Has custom queueing command been removed ?

Hello,

Now I am going to upgrade router with IOS ver 12.4 which has custom queueing configuration.

New router cisco2901 with IOS ver 15.2(4), and tried to apply current config, but it does not recognize "queue-list" command.

I checked feature navigator which image and feature-set support this, but it says IOS 15.2(4) on Cisco2901 support this.

Does anyone know if custom queueing was removed recently, or this is missed at succeeding feature from 12.4 to 15.0 ?

RGDS,

2 REPLIES
Cisco Employee

Has custom queueing command been removed ?

Hi k-baba,

Custom Queueing has indeed been removed from recent IOSes. The MQC along with CBWFQ/LLQ is, in general, the only queueing mechanism available. Check out the following document for more information. It also contains examples of migrating the custom queueing configuration into MQC.

http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/legacy_qos_cli_deprecation.html

Best regards,

Peter

New Member

Has custom queueing command been removed ?

Thank you Peter,

I also could find link for "Legacy QoS CLI Commands Deprecation"

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/quality-of-service-qos/product_bulletin_c25-580832.html

Applying CBWFQ on dialer or multilink ppp interface will not be a problem, but I just want to say command referrence documents should be updated.

Best Regards,

150
Views
0
Helpful
2
Replies