Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Health of 7200 router?

Hi

How can I check the health of 7200 router

i.e temperature,power supply status etc.

*I have min access on router......

4 REPLIES
Purple

Re: Health of 7200 router?

Hi,

'show environment all' should do it. You can do it from the user EXEC mode.

Paresh

PS. Pls do rate posts.

New Member

Re: Health of 7200 router?

Hi Paresh,

Thanks for your reply.This command is working.

It is showing following output, as I am fresher

I am not able to conclude this output.

I am confuse!! It's good if you can explaine me.!

Power Supplies:

Power Supply 1 is Zytek AC Power Supply. Unit is on.

Power Supply 2 is Zytek AC Power Supply. Unit is on.

Temperature readings:

NPE Inlet measured at 28C/82F

NPE Outlet measured at 32C/89F

Voltage readings:

+3.45 V measured at +3.47 V

+5.15 V measured at +5.23 V

+12.15 V measured at +12.29 V

-11.95 V measured at -11.85 V

Thanks a lot.

Kunal

Purple

Re: Health of 7200 router?

Kunal,

Basically, it's telling you that everything is okay:

- both power supplies are operational

- the temperature readings are quite normal

- the voltage readings are very close to what they should be.

Paresh

New Member

Re: Health of 7200 router?

Thanks Paresh

Now its clear.

Thanks

Kunal

109
Views
10
Helpful
4
Replies