Help!! AAA Authentication & SSH with the newer 2900 series
I recently configured a 2921 router for aaa & SSH .... here are the sample configs. followed by the problem encountered.
ip domain name mmmove.corp
username xxyz privilege 15 password zzyx
aaa authentication login default local aaa authorization console aaa authorization exec default local
! line con 0 line aux 0 line vty 0 4 transport input ssh line vty 5 15 transport input ssh !
crypto key generate rsa modulus 1024 general-keys
Here's the problem - I'm getting locked out of the router. The research I completed stated that the local database has to be established prior to any aaa configurations being applied. That order of operation is being followed.
But, once I logout and try to log back in - I get authentication failed!!!!!!
If there something I'm missing here - breaking into the router constantly can't be the solution lol!!!????
Re: Help!! AAA Authentication & SSH with the newer 2900 series
To the original poster: are you sure that it is a problem with authentication failed. I have had experiences that seem similar to yours which actually turned out to be authorization failed rather than authentication failed.
Perhaps you would test again and post the commands entered and the exact error message generated by the router?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...