HELP I mistyped the confreg variable in ROMMON

[sticano]

I typed confreg 0x2124 and reset my 2811 and now the characters are not recognizable. How do I undo this mistake?

[viyuan700]

in 0x2124 mode console speed is 19200 so select speed 19200 instead of 9600 in hyperteminal.

Then you can reset it again.

[sticano]

that was it. Thanks..

[davidvelar]

I typed 0x21142 in my Cisco 2811 confreg,

do you know the solution?

Thanks

The output shows nothing but CCCCCCCC (but the C is in the French version with the comma under the letter C).

[davidvelar]

Solution found:

Baud rate = 2400.

[SachinKotian]

I'll need your help please!!

I mistyled the confreg as: 0x1242


Please suggest solution.

Regards,

SachinKotian

[SachinKotian]

Hi Viyuan700

I'll need your help please!!

I mistyled the confreg as: 0x1242


Please suggest solution.

Regards,

SachinKotian

[viyuan700]

Hi Sachin,

Please check the link below and had the solution. As per them you need to set Baud Rate to 1200.

https://supportforums.cisco.com/discussion/11593861/cisco-2600-router-confreg-1242

[SachinKotian]

Hi Viyuan700 .. 

thankyou .. :) this worked.