I have a private line connected to a 2800 and I have a backup VPN connection setup with a pix501. The default gateway for all the PCs is the 2800. What is the best automatic way I can send the traffic through the pix501 VPN tunnel if the private line connection goes down?
What is your network topology? are the pix and the 2800 connected on the same subnet?
One way is to have a higher metric route ofor the destinations on the 2800 pointing to the PIX. This way when the private line is down, the packets would be sent to the PIX which can initiate the VPN connection.
Something simialr would be required on the other end to point the connection back to VPN
This would however does not address the failure of the 2800 itself.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...