Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Help me to select switch type?

I want to select switch that support two function : Ethernetchannel and GigabitEthernet. Please help me to list some this switch that have this function. And, could you tell me price of this switch type.

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
Gold

Re: Help me to select switch type?

have you looked at the cisco products page ?

http://www.cisco.com/en/US/products/hw/switches/index.html

Hall of Fame Super Gold

Re: Help me to select switch type?

Gee whiz.  This is a tall order.  Do you have any other information?  8, 12, 24 or 48 port?  PoE or non-PoE?  Chassis-based or not?

Layer 2 switches (Gig)

2350/2360, 2975, 2960G, 2960S

Layer 2/Layer3 switches (Gig)

3560G, 3750G, 3560E/3560X, 3750E/3750X

5 REPLIES
Gold

Re: Help me to select switch type?

have you looked at the cisco products page ?

http://www.cisco.com/en/US/products/hw/switches/index.html

Hall of Fame Super Gold

Re: Help me to select switch type?

Gee whiz.  This is a tall order.  Do you have any other information?  8, 12, 24 or 48 port?  PoE or non-PoE?  Chassis-based or not?

Layer 2 switches (Gig)

2350/2360, 2975, 2960G, 2960S

Layer 2/Layer3 switches (Gig)

3560G, 3750G, 3560E/3560X, 3750E/3750X

New Member

Re: Help me to select switch type?

Thanks for your support.

Yes, i want to find the sw layer 2 (support or non-support PoE is Ok).

As, enclosed file i show you the aggregate link: 300 + 300=600 (Mbps).

And, i only need sw from 8 to 12 port.

Could you show me the sw type exactly?

Hall of Fame Super Gold

Re: Help me to select switch type?

And, i only need sw from 8 to 12 port.

Right.  This narrows down a fair bit.

WS-C2960G-8TC-L is 7 10/100/1000BaseTx port.

There are no other 8 or 12 ports that are Gig.  There are 8 or 12 ports that are only 10/100BaseTx.

New Member

Re: Help me to select switch type?

Yes, I have one more question

I read on internet, Etherchannel function of SW is defined by 802.3ad standard (Wikipedia.com). And all cisco SW have the ability to support EtherChannel.


So, when i chose sw, can i base on 802.3ad standard or others?

BR/

318
Views
0
Helpful
5
Replies