Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Help Please

Hi we have a situation in which we need to be able to terminiate or bundle 8 T1 circuits on a 3845 router. What would be some recommendations? ie what type of cards would be needed, would those cards need to be have built in DSU's?? Any information would be appreciated.

4 REPLIES
Blue

Re: Help Please

Community Member

Re: Help Please

Thanks for the information, now looking at this for the prices.

Hall of Fame Super Bronze

Re: Help Please

If you are planning to go with built-in CSU/DSUs, you can purchase (4)VWIC2-2MFT-T1/E1 and if you are planning to go with external CSU/DSUs, then (2) HWIC-4T would do.

Per,

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html

"Cisco 3845 integrated services router with two Gigabit Ethernet fixed LAN ports, one SFP slot, four NMEs, four HWICs, two AIM slots, 4 PVDM slots Cisco IP Base software, and AC power"

"Cisco 3800 Series routers also feature the widest range of voice-gateway interfaces, scaling to meet the needs of the smallest to largest branch requirements for voice termination densities using a combination of network modules, extension voice modules (EVMs), voice interface cards (VICs), voice/WAN interface cards (VWICs), and onboard packet voice DSP modules (PVDMs). Customers have unprecedented scalability for supporting up to 24 T1/E1 trunks and 88 foreign-exchange-station (FXS) ports for analog phones, fax machines, key systems, and conference stations."

HTH,

__

Edison.

Please rate helpful posts

Community Member

Re: Help Please

Thank you

135
Views
6
Helpful
4
Replies
CreatePlease to create content