Hi, I need to update the firmware on some of our Cisco 837 ADSL routers. They are all in remote offices and I want to do this remotely. I have a TFTP server they can ping. Can you help locating the latest firmware I would hate to load the wrong one.
You'll have to use the "copy tftp flash" command, and then use the "boot system flash:" to point on the new IOS, the down time would occur when you have to reload the router to come up with the new IOS you have installed.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...